MAINTENANCE FOR OUR CCC POLISHED CONCRETE FINISH
CCC Polished Concrete is a coating free system with the objective of providing a finished floor with little ongoing maintenance.
Your floor should be maintained on a regular basis by vacuuming and cleaning in the following manner: To bucket of warm water, add recommended amount of Tough Green Cleaner (or neutral ph cleaner), and mop floor with a microfibre mop. The floor should be damp for the shortest time possible. This will leave the floor clean & streak free. This simple cleaning should be carried out as required to keep the floor looking its best.
Avoid cleaning with any other products as this may cause rejection of coating when maintenance is required.
CAUTION: Concrete floors may be slippery, particularly when wet, please take care as no responsibility is accepted. Do not use any buffing type machine or product or any type of abrasive cleaner as this will dull the surface.
PERIODICAL MAINTENANCE
Low Traffic Areas / Residential
- Depending on the surrounding environment these areas will require a burnish using a high speed burnisher with Red Nylon Pads only when deemed necessary.
High Traffic Areas / Commercial
- Burnish on a regular basis with a high speed burnisher using Red Nylon Pads to maintain a high gloss and or dust free surface.
Caution: Do not use any Bleach Based or Citrus Based Cleaners
Simple Tips:
- Fit protective pads to chairs & tables.
- Castor legs should be fitted into castor cups.
- Use a dry Microfibre Mop regularly.
- Avoid direct heat from free standing heaters.
- Spills should be cleaned up straight away to avoid penetration or damage.